AZVERIN

EHPRO Model M RDA / Обзор

Recommended Posts


intro_800.jpgi.gif

Симбиоз компании EHPRO с американской компанией Duality Designs подарил нам дрипку Model T с очень интересной базой, странными отверстиями для обдува и своеобразным дрип-типом. Но на этом изыскания не закончились. Недавно была представлена дрипка Model M RDA которая обладает бесстоечной конструкцией базы и интересной конструкцией обдува. Давайте посмотрим на новинку поближе.

Поставляется RDA в коробке из белого плотного картона в цветах фирменного стиля компании EHPRO. На обратной стороне упаковки находятся информация о сертификатах, производителе и security code для проверки оригинальности на официальном сайте.

1_800.jpgi.gif

Внутри мы найдём сам RDA и пакетик с допами и японским хлопком.

3_800.jpgi.gif

В комплектацию входят

 
  • Дрипка EHPRO Model M RDA
  • Переходник под 510-ый дрип-тип
  • Комплект запасных винтов
  • Комплект запасных о-рингов
  • Шестигранный ключ
  • Две преднамотанных койла (похоже на то что из SS 316)
  • Японский хлопок


2_800.jpgi.gif
4_800.jpgi.gif

RDA выполнен из нержавеющей стали. Возможные варианты цветов, черные и стальной. Топ-кэп имеет непривычную для RDA форму и верхний обдув, который регулируется при помощи кольца.

5_800.jpgi.gif
a1_800.jpgi.gif

Характеристики можно видеть на изображении ниже.

a3_800.jpgi.gif

Конструкция RDA достаточно оригинальна, с очень интересно реализованным обдувом. Состоит из базы, колбы и верхней крышки (Топ-кэп), которые мы рассмотрим подробно.

a2_800.jpgi.gif

Топ-кэп имеет оригинальную конструкцию дрип-типа, которая была представлена в модели с литерой “Т”. Основание выполнено из делрина, что хорошо сказывается на теплоизоляции.

11_800.jpgi.gif

Переходник под 510-ый дрип-тип не имеет делриновой проставки. Удерживается одним о-рингом, но при этом посадка достаточно плотная и надёжная.

14_800.jpgi.gif
15_800.jpgi.gif

Колба RDA имеет два отверстия обдува, размер которых можно отрегулировать при помощи кольца без насечек, вращение кольца обдува ограничивается стопором.

9_800.jpgi.gif

Конструкция забора воздуха очень похожа на ту что мы видели на gear rda. Воздух забирается через щели обдува и по каналу внутри дрипки подаётся немного ниже уровня установленных спиралей, обеспечивая псевдо нижний обдув.

a4_800.jpgi.gif

Колба имеет два “замка” в нижней её части, которые нужно совместить с “ключами” на базе, для правильного положения воздуховодов на против койлов.

7_800.jpgi.gif
8_800.jpgi.gif
10_800.jpgi.gif
6_800.jpgi.gif

База RDA имеет бесстоечную конструкцию. Плюсовая "стойка" располагаться на PEEK изоляторе и фиксируется к корпусу базы с помощью не регулируемого стального пина. Койлы устанавливаются сверху в отверстия диаметром 2,5 мм и фиксируются боковыми винтами шестигранным ключом. Есть возможность диагональной установки одной спирали, которая будет расположена по центру и обдуваться с двух сторон. Ванна имеет глубину 6 мм, и весьма вместительна. На базы установлено два уплотнительных кольца для удержания колбы и “ключи”, для совмещения обдува.

12_800.jpgi.gif
13_800.jpgi.gif

Для установки спиралей в Model M RDA выравнивание ножек койлов до определенной длины, которая составляет около 5-6 мм. Установка спиралей и укладка ваты никаких сюрпризов не преподносят.

16_800.jpgi.gif
17_800.jpgi.gif

Сделаем окончательные выводы.

Плюсы
 
  • Интересный дизайн
  • Удобная бесстоечная база
  • Большие отверстия в стойках для установки спиралей
  • Есть возможность использовать одну спираль
  • Большая ванночка
  • Регулируемый обдув
  • Переходник под 510-ый дрип-тип
  • Псевдо нижний-боковой обдув
  • Небольшая вкусовая испарительная камера
  • Отличная передача вкуса
  • Отсутствие конденсата и протечек


Минусы
 
  • Отсутствие насечек на кольце регулировки обдува
  • Достаточно сильный нагрев


В завершении хочу добавить что после того как я познакомился с EHPRO Model M RDA моя любимая вкусовая дрипка tsunami rda переместилась на полку на постоянную прописку.
Дрипка вкусовая, рассчитывать на мега-паровозинг не стоит.
RDA Model M оставила крайне положительные впечатления и учитывая её небольшую стоимость могу советовать данный RDA к приобретению.

Благодарю компанию EHPRO за предоставление Model M RDA на обзор.

Обзор в блоге.
  • Положительно 2

Поделиться сообщением


Ссылка на сообщение
Поделиться на другие сайты

Спасибо за обзор! Как мне показалось немного длинноваты хвосты у ваты. А так достаточно интересная дрипка! :good:

Поделиться сообщением


Ссылка на сообщение
Поделиться на другие сайты

Для публикации сообщений создайте учётную запись или авторизуйтесь

Вы должны быть пользователем, чтобы оставить комментарий

Создать учетную запись

Зарегистрируйте новую учётную запись в нашем сообществе. Это очень просто!

Регистрация нового пользователя

Войти

Уже есть аккаунт? Войти в систему.

Войти

  • Последние посетители   0 пользователей онлайн

    Ни одного зарегистрированного пользователя не просматривает данную страницу

  • Похожий контент

    • AZVERIN
    • AZVERIN
    • Efun.top
      От Efun.top

      There has been a long time since the first RDTA appeared. But RDTA, with very deep flavors of RDA and endurance of RTA, has failed to become popular all the time due to some fatal defects in design, which bring unpleasant experience to some vapers. So this time can we get some improvement from wotofo serpent RDTA?
      Packaging :

      Still with the wotofo style, but there are some changes on the back of package with detailed information of goods’ quantity and warnings, including  1*Serpent RDTA, 1*Supplementary Pyrex Tank, 1*Drip-tip supplementaire, 1* Screwdriver, 1*Japonese Cotton Pad, 2*Twisted Coils, 1*Set Silicone Joints.
      Appearance :

      The stainless steel Atomizers (22mm diameter) with mellow shape, looks smaller and delicate. The yellow PEL material and the 510 Drip Tip makes the metal color look smoother. The design of Drip Tip is similar with the Atomizers tank for the nice appearance on its rounded top, which looks more comfortable.

      The slot in middle of Atomizers tank joints well with other parts , and we can see the manufacturer has made great efforts in its appearance. 
      Structure :

      The wotofo serpent RDTA can be divided into 510 Drip Tip, Atomizers tank, electrode units, Glass Replacement, the deck of tank, and Electrode screw. There are two ways to dismantle it-General dismantling and complete dismantling. Generally, only dismantle the lid and the deck ( not the tank), filling cotton into the tank from the deck. Complete dismantling is needed when players want to clean and replace E juice. That means players have to dismantle the Electrode screw at the bottom or the tank cannot be unscrewed.
      Specification :

      A conical part(6.5mm~7.5mm diameter inside) into the stainless steel drip tip can make the condensate reflow.

      The drip tip (8.5mm diameter inside) made of Heat insulation material, without a conical part, enlarges the size of vent. Apparently, it serves for thick smog chasers.

      The atomizer tank inside was made into an arc shape, which can compress the vapor further. It is great in work without any defects visually.

      Inside the tank, only 9mm in height. Except the electrode column and the wick, the space inside the tank is very small. Such a design is common in taste RDA, and it can concentrate smog greatly to help vapers to get better flavor.

      A pressing electrode column is used in the deck, and the wire can be installed and operated easily. But there is no spring inside, so it is a little bit inconvenient for vapers and they have to more it by themselves. In the middle deck, the size of vent hole is 4mm large. From the arrow in the picture, there are four vent holes but actually four inside. It can help take heat and smog away effectively from the wire.    
      The cotton hole is on both sides of the vent hole, also with 4mm large in size, to ensure the circulation of E juice. 

      The electrode screw needs to be removed when vapers want to dismantle the tank. During this process, vapers don’t need to worry about the waste of E juice because the tank can contain 2.5ml E juice at most. By the way, medium users can play RDTA for 3 to 4 hours due to its lower endurance.   
      Operation :

      All the wires tested this time are from efun.top.

      Data: 28ga, 2.5 diameters, 8 rounds closely. 

      Use single coil wire and make it right above the air hole. 

      Use thinner wire to place the cords on top. To fix the wire better and don’t need to do anything with the cords.

      Use right width of cotton, like makeup cotton from MUJI and GANGWON. I use the cotton cut into 2.5 diameters in width, and remove the non-woven on both sides to thread the cotton. 

      Use tweezers to fill the cotton in. The length of cotton is 2.5cm.

      It is very easy to operate without dropping E juice into it again and clean it. When using single coil tank, vapers can use it safely and wicks can be changed quickly. Players don’t need to put the whole part of cotton into the tank because the atomizer will be leaned when smoking and the E juice will inflow it. 
      Evaluation :

      After several tests, finally I’m sure that wotofo uses the same coil tank as the taste RDA. Some popular types of coil tank like Big smog or other else don’t fit this atomizer because it will cause heat smog and then essence will be destroyed.       
      Unlike previous RDTA, E juice leaking cannot be seen with this new atomizer. (of course, E juice is still seen inside when the tank was pulled out.)
      Recommendation :
      ①wire diameter 0.2, circle diameter 2.5, number of turns 9, single coil tank, power 12W, resistance 3.16Ω, 0.5mm left when air hole is on. Smoke with mouth; flavor:clear layer of taste, rich flavor, full-bodied taste, high taste reduction.  
      ②wire diameter 0.3, circle diameter 2.5,number of turns 8, single coil tank, power 18W, resistance 1.52Ω; air hole is completely on; smoke with lugs.  Flavor of smog: the detail is slightly inferior to ①, the clearness is still in higher level but lower than KF3; still good in fullness; more full-bodied than ①; similar to ① in taste reduction; can barely reach the level of big smog. 
      ③26ga*32ga Clapton A1 wire, circle diameter 3.0, number of turns 6, single coil tank, power 26W, resistance 0.93Ω. Smoke with lugs; bigger smog, a bit light in taste, great fullness, the taste reduction is fine, but inferior to ① and ② in the layer of taste.  
      ④Original 3.5 lap diameter Clapton wide wire, single coil tank, 0.6Ω, the flavor is quite intense, the taste reduction is fine, strong sense of particle, big different from other 3 ways in layer of taste. 
      Summary :

      To be honest, I almost underestimated Wotofo when I got it because you know people will use complex coil and low resistence coil to make big smog.    
      I made a mistake on using complex coil constantly to have tests, so the results are not good. But when I use 0.4 3.0 7 laps coil, the results are better. I am very impressed that Wotofo is purely a palate RDTA. 
      I have to say RDTA has the advatage in leading E juice and it allow 5V to use it. Players don’t need to worry about over- burning wick and they can enjoy their vape safely. . 
      I know lots of new players touch vape of KF series firstly.  But many of them give up flavor RDTA after they try RDA for its rich intense flavor and big smog. I believe this serpent RDTA will bring you the feelings you want like before. And it worth trying for those like delicate taste.  
      Thanks for reading, buy it at $24.99 here: Wotofo serpent RDTA